GlockMeisterG21
Campaign Veteran
Let me start out by saying that there is nothing wrong with a stock Glock. They are fantastic firearms, I just can't leave stuff alone. I love projects and enjoy putting my own mojo on my guns. That said please refrain from the "It's fine as it is" posts. You and I know they are, so there's no need to post about it. Thanks!
Well, I finally got around to ordering a Ghost Tactical trigger kit Sunday night. It was delivered this afternoon,I have to say was pretty darn fast. I got the entire installation kit found here on their website.
http://www.ghostinc.com/product/GHO_TIK/TACTICAL-INSTALLATION-KIT-for-Glocks-GEN-1-4.html
For the record I have a Glock 17 Gen 4 With the following mods already.
Tru-Glo Fiber/Night sights
Surefire X300
Glock OEM Extended Slide Release
KKM Precision Barrel threaded by AWC Systech
Installation:
It took about 20 minutes to fit the trigger connector and install the springs. The only specialized tool needed other than what came with the kit was a bench grinder to fit the connector. A dremel could have been used as well but I didn't have one handy. It took a little patience because you have to remove a little bit of metal from the connector, install it, and try it. I think I had to do this about five times but now I can pretty much detail strip my Glock with no issues.
First Impressions:
The trigger is extremely smooth and pretty darn light. I'll use a trigger pull scale when I get to work tomorrow. There is a little squish after take-up but it's not bad. The reset is still very positive and very much resembles my 1911. All in all it seems worth the 36 bucks. I'll post a range report When I get home from work tomorrow.
Well, I finally got around to ordering a Ghost Tactical trigger kit Sunday night. It was delivered this afternoon,I have to say was pretty darn fast. I got the entire installation kit found here on their website.
http://www.ghostinc.com/product/GHO_TIK/TACTICAL-INSTALLATION-KIT-for-Glocks-GEN-1-4.html
For the record I have a Glock 17 Gen 4 With the following mods already.
Tru-Glo Fiber/Night sights
Surefire X300
Glock OEM Extended Slide Release
KKM Precision Barrel threaded by AWC Systech
Installation:
It took about 20 minutes to fit the trigger connector and install the springs. The only specialized tool needed other than what came with the kit was a bench grinder to fit the connector. A dremel could have been used as well but I didn't have one handy. It took a little patience because you have to remove a little bit of metal from the connector, install it, and try it. I think I had to do this about five times but now I can pretty much detail strip my Glock with no issues.
First Impressions:
The trigger is extremely smooth and pretty darn light. I'll use a trigger pull scale when I get to work tomorrow. There is a little squish after take-up but it's not bad. The reset is still very positive and very much resembles my 1911. All in all it seems worth the 36 bucks. I'll post a range report When I get home from work tomorrow.
Last edited: