• We are now running on a new, and hopefully much-improved, server. In addition we are also on new forum software. Any move entails a lot of technical details and I suspect we will encounter a few issues as the new server goes live. Please be patient with us. It will be worth it! :) Please help by posting all issues here.
  • The forum will be down for about an hour this weekend for maintenance. I apologize for the inconvenience.
  • If you are having trouble seeing the forum then you may need to clear your browser's DNS cache. Click here for instructions on how to do that
  • Please review the Forum Rules frequently as we are constantly trying to improve the forum for our members and visitors.

Serial number finished 80% lower

WalkingWolf

Regular Member
Joined
Jul 31, 2011
Messages
11,930
Location
North Carolina
This subject came up on another forum. Basically the person bought an 80% lower, but was asking about coatings after the gun is finished. A couple people claimed that for a licensed coat shop to coat the gun the gun must have identifying marks. I cannot find anything requiring that except for manufacturers, and importers of firearms. It is not important to me, I just felt like picking your brains.(Zombie Groan)

What I was told from a reputable online 80% seller is that no SN or other marks are required for repairs, painting counts as repairs. I contacted a Cerakote licensed dealer and got the same answer. Plus I researched AR15.com, yea it's the internet, but these guys are deep into their AR's, and 80% lowers. The answer is all the same.

Personally I do not want a 80% lower, when I can buy a finished for the same, or less. Add to that if a person uses normal purchasing practice they are on the radar. Credit card, internet, UPS, internet. The only way to be really off the radar is pick it up in person, with cash, wearing a disguise.

IF I did build one I would mark it, if stolen, or lost that would be the only way to enter it into the system.

Hopefully I can discuss it here without sending someone into cardiac arrest, which I seem to be doing on the other forum. Guess it is just rude not to agree with someone.
 

davidmcbeth

Banned
Joined
Jan 14, 2012
Messages
16,167
Location
earth's crust
Several ways of painting a finished 80% .. sending it out is one (albeit more expensive than simply buying the Brownell's spray paint and waiting a week for the coating to fully cure @ room temp).


It would not require any serial # to be produce or to send out to be painted.

Some paint prior to finishing, some do it afterwards.

So these folks who refuse to paint a gun would not paint a gun that was produced prior to the requirement of serial numbers ? Because right now, one can make a gun without them so what's the difference.

And repairs? I would not want to repair most receivers if they got damaged in any event ~ I would want the thing replaced. I can understand why a guy would not want to re-weld a receiver that has been purposefully cut in two. But since many are aluminum it would require a great deal of skill to accomplish such a task ~ and likely be more expensive than just making a new one from scratch.

I never recommend that someone mark their homemade gun..if stolen or lost, I would consider it a loss. You go and tell a cop that a gun you made was stolen and expect issues.
 

MSG Laigaie

Campaign Veteran
Joined
Jan 10, 2011
Messages
3,239
Location
Philipsburg, Montana
This seems to be an issue with the shop owner, not the law. I have more than a dozen 80% ARs in my personal inventory, none have any markings on them at all. If I put a number on a lower at all, it would be found on the tab the pistol grip attaches to. The numbers are for ME and me only. None of my 80ARs have roll marks, altho I will put a glock logo on the 9mm that uses glock mags.

The EDC Ruger I was carrying had duct tape over the serial number. If you want to "run my numbers", you will need a warrant. My "serial numbers" are my business, unless I am committing a crime. Go Away, Leave me alone. I am not the droid you are looking for.
 

F350

Regular Member
Joined
Mar 22, 2012
Messages
941
Location
The High Plains of Wyoming
This seems to be an issue with the shop owner, not the law. I have more than a dozen 80% ARs in my personal inventory, none have any markings on them at all. If I put a number on a lower at all, it would be found on the tab the pistol grip attaches to. The numbers are for ME and me only. None of my 80ARs have roll marks, altho I will put a glock logo on the 9mm that uses glock mags.

The EDC Ruger I was carrying had duct tape over the serial number. If you want to "run my numbers", you will need a warrant. My "serial numbers" are my business, unless I am committing a crime. Go Away, Leave me alone. I am not the droid you are looking for.

I have an email from BATFE "Merely, attaching black tape to a firearms serial number does not constitute a violation of Federal law."

I might have some complete 80% receivers; and if I did none would have any markings either :rolleyes:
 

bc.cruiser

Regular Member
Joined
Apr 2, 2011
Messages
786
Location
Fayetteville NC
The EDC Ruger I was carrying had duct tape over the serial number. If you want to "run my numbers", you will need a warrant. My "serial numbers" are my business, unless I am committing a crime. Go Away, Leave me alone. I am not the droid you are looking for.

I use a strip of black plastic electrical tape on mine. I intend to get some metallic foil bar code tags to attach over any numbers. As indicated, covering any markings is not alteration or destruction.
 

Phoenix David

Regular Member
Joined
Sep 8, 2009
Messages
605
Location
Glendale, Arizona, USA
This subject came up on another forum. Basically the person bought an 80% lower, but was asking about coatings after the gun is finished. A couple people claimed that for a licensed coat shop to coat the gun the gun must have identifying marks. I cannot find anything requiring that except for manufacturers, and importers of firearms. It is not important to me, I just felt like picking your brains.(Zombie Groan)

A 80% lower is just a hunk of metal in a particular shape, it's not a firearm

So if I want my shovel coated would it need identifying marks? :)
 

Phoenix David

Regular Member
Joined
Sep 8, 2009
Messages
605
Location
Glendale, Arizona, USA
I use a strip of black plastic electrical tape on mine. I intend to get some metallic foil bar code tags to attach over any numbers. As indicated, covering any markings is not alteration or destruction.

Maybe security tape would be better that way you would be able to tell if it was removed or tampered with.
 

JustaShooter

Regular Member
Joined
Jul 26, 2013
Messages
728
Location
NE Ohio
A 80% lower is just a hunk of metal in a particular shape, it's not a firearm

So if I want my shovel coated would it need identifying marks? :)
The OP was discussing getting the *completed* lower coated. Once complete, it is a firearm according to the BATFE.
 

JustaShooter

Regular Member
Joined
Jul 26, 2013
Messages
728
Location
NE Ohio
Well, not always....could be a crossbow...not a firearm at all....

Sorry, no, per the BATFE a completed lower is a firearm. It doesn't matter if you decide to attach a crossbow upper or even a bubble maker upper if such a thing exists, the lower is s still a firearm according to BATFE.
 

davidmcbeth

Banned
Joined
Jan 14, 2012
Messages
16,167
Location
earth's crust
Sorry, no, per the BATFE a completed lower is a firearm. It doesn't matter if you decide to attach a crossbow upper or even a bubble maker upper if such a thing exists, the lower is s still a firearm according to BATFE.

I would disagree ... a firearm, by definition, expels a projectile via explosion creating gases that eject the projectile.

But, again, one cannot regulate anyways ... need for ser #s is not mandatory.

https://www.atf.gov/file/61446/download

The 4473 form, also indicates that it is not an "other" type of firearm.

What form would a dealer complete? 4473 is not it.

Also, can a felon own a crossbow? Yes.

So anyone can buy a AR lower if the purpose is for a crossbow.
 
Last edited:

Firearms Iinstuctor

Regular Member
Joined
Jul 12, 2011
Messages
3,428
Location
northern wis
You can disagree David but I don't think your argument in this political environment well work well in court.


Even though I agree the definition of what constitutes a firearm is all screwed up.
 

MAC702

Campaign Veteran
Joined
Jul 31, 2011
Messages
6,331
Location
Nevada
I would disagree ... a firearm, by definition, expels a projectile via explosion creating gases that eject the projectile...

Word definitions have scope.

Legal definitions of "firearms" are different than practical definitions, and a completed AR lower is a legal firearm, regardless of its incapacity to currently do anything.
 
Top